Specifications
EN-46
Item
Category
Specifications
Other I/O
Devices
I/O Ports
Two USB3.0
One 3.5mm Audio combo jack for Mic/headset(CTIA
standard)
One docking connector
One Expansion connector for Ext. devices on the
back top side of the unit (1 x power, 1 x RS-232, 2 x
USB 2.0)
DC-in Jack
Note:
•
An I/O door (located on the right side of the unit) is
designed to cover the USB port, audio jack, Micro
SD card slot.
•
SIM card can be changed by opening the I/O door
RF connectors located at the bottom (Factory
Option)
---(Dual antenna connectors that can pass-
through wireless connections including WWAN and GPS)
RF switch board is CTO
(Docking connector includes 1 x power, 1 x USB 3.0
(Including USB 2.0), 1 x HDMI)
NFC/RFID
Optional Ext. RFID reader support ISO 15693,
14443A/B stand, NFC ISO 18092 (work within
2cm) (Design/interface Ready)
NFC/RFID is a CTO option (located on the back
side of unit
MSR and
Smart card
reader
Optional Ext. Magnetic Stripe Reader support
ANSI/ISO 7810, ISO 7811-1/6, 7813, JIS X6301,
X6302, AAMVA
Two-frequency coherent phase (F2F) recording
methods
ISO Track1 - IATA , Track2 - ABA and Track3 -
THRIFT decoding methods
Bi-directional card reading
Supplies 54 byte value
Encrypts all track data and the value
Card speed through the unit may vary from 3 ips
to 100 ips (7 cm/s to 250 cm/s)
Optional ext. smart card reader slot meets ISO 7816.
MSR/smart card module is a CTO option.
Note:
MSR module doesn’t support IP65 feature.
Summary of Contents for 7260NG
Page 1: ...EN 1 ...
