9
Chapter 2
Installation Introduction
2.1 Hardware Installation
Before You Begin
Make sure your computer system meet the system requirements
Make sure the computer and all related equipments are power off
Please note that VisionDTV can’t be inserted with the analog TV tuner card at the
same system. Please remove the analog TV tuner card or other PCI card that with
Conexant BT878 on board and their drivers before install VisionDTV.
Step1: Insert VisionDTV PCI-Ter Card
Remove the cover of the slot you intend to use and unscrew the mounting bracket
Pick up the VisionDTV PCI-Ter Card and position it over the expansion slot you
have chosen
Push the card firmly and evenly, confirm it seated in the slot entirely
Screw the bracket of the VisionDTV PCI-Ter Card onto the computer chassis
Step2: Cable Connection
Make sure the cable correctly connected with terrestrial antenna
Connect the cable to the LNB-in connector and fasten the plug
