4. Locate Left Connect Panel(H) and Left Side
Panel(E),Insert one Wood Dowel (N) into each
of the pre-drilled holes, Attached the Left
Connect Panel to the completed assembly from
step 3 and the Left Side Panel.
5. Locate Right Connect Panel(I) and Right Side
Panel(F),Insert one Wood Dowel (N) into each
of the pre-drilled holes, Attached the Right
Connect Panel to the completed assembly from
step 3 and the Right Side Panel.
6. Locate Left Back Panel (K), attached to the left
back of the completed assembly from step 5,
using a Phillips Head screw driver, screw screws
(Q) through the pre-drilled holes in the Back Left
Panel to the completed assembly.
7. Locate Right Back Panel (S), attached to the right
back of the completed assembly from step 5,
using a Phillips Head screw driver, screw screws
(Q) through the pre-drilled holes in the Back
Right Panel to the completed assembly.
8. Locate the completed assembly from step 7 and
set out face down on the scratch free surface,
then attached the Hearth/Base and lay finished
side towards the completed assembly as drawing.
9. Insert one Wood Dowel (N) into each of the pre-
drilled holes, then insert Nut(P2) into each of the
pre-drilled holes in bottom of all side panel,
attached Hearth/Base to the completed assembly
with Bolt (P1) and Washer(M) through the pre-
drilled holes in the Hearth/Base to Nut. Using
Phillips head screwdriver tighten all Bolts.
E
F
N
N
H
I
K
K
Screw
(Q)
S
Right
Connect
Panel
Back
Left
Panel
Back
Right
Panel
Left
Side
Panel
Right
Side
Panel
Left
Connect
Panel
Hearth/Base
M
M
P2
Nut
L
L
N
N
N
N
A
23WM137-ESF-30Jun_06.indd 4
2006-7-1 14:12:15
