P L E A S E R E A D A N D F O L L O W A L L S A F E T Y T I P S
For a complete tight fit every bolt
should have a flat washer. First slide a
flat washer onto the bolt. Your bolt is
now ready for use.
Now it is time to assemble your Fireplace. All
panels are labeled Left and Right as viewed
from the front of unit.
1. Locate the Center Front Panel (D), Center Left Side
Panel (C) and Center Right Side Panel (B) and set
out face down on the scratch free surface.
2. Insert one Wood Dowel (N) into each of the pre-
drilled holes.
3. Push the Center Left Side Panel and Center Right
Side Panel snug to the Center Feont Panel. Make
sure the Wood Dowels are seated in the pre-drilled
holes. Insert Bolt (L) and Washer (M) into the
holes in the mounting blocks.
HAND TIGHTEN ONLY.
E-2
GETTING STARTED
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all parts. Make sure
you do not discard the hardware.
HELPFUL HINTS
• Some steps are more easily handled with two adults.
• Attach the fireplace insert to the completed wood mantel last. INSTALL INSERT IN FROM THE
BACK OF THE FIREPLACE SO AS NOT TO SCRATCH THE HEARTH/BASE.
• Use care in assembling your new fireplace, take your time and use the hardware provided and a qual-
ity Phillips head screwdriver. NEVER OVER TIGHTEN BOLTS.
CARE & CLEANING
1. Dust your fireplace regularly with a soft non-lint producing cloth or household dusting product.
2. You can clean your fireplace with a gentle non-abrasive household cleaner. Make sure to dry your
fireplace immediately with a soft cloth or towel.
N
N
Center Front
Panel
D
C
B
L
M
Center Right
Side Panel
Center Left
Side Panel
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer
Service: [email protected], or call 1-866-661-1218 in English,1-866-374-9203 in French,
1-866-661-1218 in Spanish. Please identify the parts you need,and model number . Make sure to
include your name and address.
• Do not sit on top of the mantel.
23WM137-ESF-30Jun_06.indd 3
2006-7-1 14:12:12
