Manual TwinSaw CDC double cut saws
- 5 -
1. Technical characteristics and insert
1.1 Technical characteristics
The TwinSaw CDC-double cut saws are operating with an electronic motor, the CDF-saws are
operating with fuel. They have two counterrotating blades that have the same size. Because
of the particular form of the gearhead unit the saw blades are rotating in opposite direction
with the same speed. They serve the EN norms for electrinic tools. Because of its form and
handling they are more similar to a chain saw than to a circular saw. Because of the
counterrotating saw blades the technique has got much famous properties:
-
cold cuts: =sharp cuts needed by cutting materials with high sensivity to
temperatures like aluminum, lead, asphalt, tar and others
-
recoil free cuts: without jamming the saw blades and the resulting kicks of the
machine. Much more security both for operator and for material especially when he
makes free cuts in close situations
-
high performance cuts: are necessary by entering smooth and tough surfaces
The saws are cutting with 3-4 times higher cutting speed than normal circular saws
and 2 times faster than angle grinders
-
variable materials, like combination of materials like wood, steel, GFK, unite-
mateial etc. Very unique and versatile cutting in almost any situation
-
effective drive performance: here are working two one-blade-saws in
outperforming synergy.
-
cuts with no burrs: By pinching sharp edges can arise. But the double cut saws
make edges with nearly no burrs.
Further characteristics you can see at our Info-CD-Rom and our homepage.
1.2.1 Insert in rescue
In rescue the double cut saws have now far reaching insert possibilities, because also in
difficult situations they make possible high performance cuts. On by they offer high safety
both for rescuer and also the victim. Espacially when you have to enter in surfaces and
smooth edges, the saws have to be used. They are also suited for the completement of
hydraulic systems. Further insert recommendations you can see at our training-CD-Rom.
1.2.2 Insert in industry
The aqpplication variety of the double cut saws in industry and professional manufacturing is
growing up every day. Cold cuts with no burrs and no kick back that are flexible by hand-
cutting have tremendous advantages many industry-areas. Now some examples:
A)
Roof construction: cutting of roof layers with bitumina and asphalt, cutting
copper sheets and a lot of other materials
B)
Construction of metal buildings: Cutting of metall sheets, isolated and non
isolated, cutting window and door openings into metal buildings very cold
without rust
C)
Destruction branches: cutting of all materials except concrete in almost any
situation with only very poor sparks
D)
Nuclear technology: cutting lead and other special isolation materials
E)
Vehicle maintenance and repair: cutting off damages with perfect edges
for rebuilding
Using the machines in industry, see the special regulations by your safety regulation authority
concerning safety clothes, masks and ear protection.
