Manual TwinSaw CDC double cut saws
- 4 -
Wear suitable clothing
Do not wear loose-fitting clothing or jewellery, which can can restrict movement and
result in accidents. Long hair should be tied back or put in a hair-net.
Eye and ear protection
Always wear safety goggles or a safety visor and use ear-plugs or ear defenders in
accordance with relevant industrial safety provisions.
Power supply
Never hold the saw by its power cable. Never remove the plug from the mains socket by
pulling on the lead. Protect the power cable from oil, heat and sharp objects. Damaged
cables should be replaced immediately by a qualified person. It is strictly prohibited –
and extremely dangerous - to attempt to "repair" the power cable.
Caring for your saw
Keep the saw clean at all times. Check the power tool, connecting cables and
accessories for damage. Wipe away grease and oil. Ensure that accessory items such as
saw blades are renewed when necessary and have damaged or worn parts replaced by
authorized persons or at a workshop. Always follow the maintenance instructions laid
down in the operator’s manual.
Power extension leads
Only use approved extension leads and ensure that they are always of sufficient length.
Check that the wire section is of the correct size. Never use leads that are damaged or
have been "repaired".
Working Position
Always keep a proper footing and balance so that the saw can be held firmly at all
times.
S3 Approved
operators
The saw must only be operated by properly trained and authorized persons. Maintenance and
repair work must be undertaken in a workshop or by approved technicians.
Personnel must receive regular instruction on the aspects of workplace safety and
environmental protection. The operating manual, and especially its safety instructions, should
be readily accessible to operators at all times.
S4 Hazards
Using the saw in its standard form for emergency rescue work, for example, requires special
care on the part of the operator. There is a risk of injury from the rotating blades and from
falling debris. Persons not wearing safety goggles or a protective visor are at serious risk of
eye injury due to flying swarf and saw chips. Care is also needed when replacing the saw
blades, which have very sharp carbide-tipped teeth.
S5 Caution
The TwinSaw CDC power saw is a new type of high-performance tool. Treat it with respect.
Only use original TwinSaw replacement parts and accessories. Fitting non-approved parts is
potential dangerous and can lead to serious injury. The use of non-approved or non-original
spares or accessories will invalidate all guarantees and waranty claims.
S6
Contact for safety issues
If you have any questions relating to safety and the correct operation of the power saw
please contact us or our agents on:
+49 (0) 209 3615 720 or mail us at:
