9 | www.twineaglesgrills.com
PORTABLE LP CONNECTION
One of the many features of the Twin
E
agles grill base is the pullout slide pan for easy access to the LP
gas tank.
1. To install the gas cylinder, pull out the slide pan
and place the cylinder onto the pan.
2. Tighten the tank holding screw to secure the gas
cylinder in place.
3. Check to ensure that the tank’s gas valve on top
of the cylinder is closed.
4. Connect the LP regulator (included) to the cylin
-
der and hand-tighten only. Open the tank valve
and make sure all connections are leak tight using
a soapy water solution. (Reference page 11 for
leak test procedure).
WARNING
•
DO NOT STORE SPARE LP GAS CYLINDER UNDER
OR NEAR THIS APPLIANCE.
•
NEVER FILL THE CYLINDER BEYOND 80 PERCENT
FULL.
•
FAILURE TO DO SO A FIRE CAUSING DEATH OR
SERIOUS INJURY MAY OCCUR.
• NOTE:
use only a 20-lbs (5 gallon capacity) gas
cylinder,
• WARNING:
DO NOT USE A DENTED OR RUST-
ED LP CYLINDER
•
NEVER USE A CYLINDER WITH A DAMAGED
VALVE.
•
ALWAYS CHECK FOR LEAKS AFTER CHANGING
THE LP CYLINDER.
•
THE LP PRESSURE REGULATOR AND HOSE SUP
-
PLIED WITH THIS UNIT MUST BE USED WITHOUT
ALTERATION.
CAUTION:
USE EASY PULL. Use the slot at the front
of the pan to push in or pull out the gas cylinder. Do
not place hand on top of the gas cylinder when push
-
ing in or pulling out the slide pan.
