twin busch 0741187302364, Installation, Operation, And Parts Manual

Page: 11 / 36

Twin Busch GmbH
11
MAINTENANCE
Easy and low cost routine maintenance can ensure the lift works normally and safely. The frequency of routine maintenance is
determined by working condition and frequency.
THE FOLLOWING PARTS NEED TO BE LUBRICATED
6.1 Daily Check
The user must perform a daily check. Daily check of safety lock system in very important – the discovery of device failure before
action could save time and prevent great loss, injury or casualty.
·Before operation, judge whether the safety locks are engaged.
· Check whether oil hoses are well connected and whether they leak or not.
· Check the connections of chain and steel cable and check the power unit.
· Check whether the expansion bolts are firmly screwed.
· Check if arm lock works well or not.
6.2 Weekly Check
· Check the flexibility of moving parts.
· Check the working conditions of safety parts.
· Check the amount of oil left in the oil tank.
· Check whether expansion bolt s are firmly screwed.
6.3 Monthly Check
· Check whether the expansion bolts are firmly screwed.
· Check the tightness of the hydraulic system and screw firm the joints if it leaks.
· Check the lubrication and abrasion circumstance of axial pins, carriages, lifting arms and other related parts and replace in
time with new ones if they failed to work well.
· Check the lubrication and abrasion circumstance of steel cable.
6.4. Yearly Check
· Empty the oil tank and check the quality of hydraulic oil.
· Wash and clean the oil filter.
If users strictly follow the above maintenance requirements, the lift will keep in a good working condition and meanwhile
accidents could be avoided to a large extent.
S/N Description
1 Upper wheel
2 Steel cable
3 Chain wheel
4 Chain
5 Sliding block
6 Pin
7 Arm block
8 Lifting arm
9 Tray
10 Down wheel