OPERATION & PROGRAMMING
18
CAMERA : FOCUS/ZOOM
FOCUS
There are three auto focus settings :
AUTO: If auto focus mode is set to auto. The camera will focus automatically.
MANUAL: Focus is operated manually. To focus, press [NEAR] or [FAR] key on the controller.
TRIGGER (default) : If auto focus mode is set to TRIGGER, the camera will focus when zoom
functions.
Note.
- Auto focus will malfunction at below condition.
: very dark or shiny area when slow shutter is activated area which doesn’t have contrast
difference
Z.SPEED
There are three zoom speed setting
- FAST / NORMAL / LOW
D.ZOOM(Digital Zoom) : To enable digital zoom, set. D.ZOOM to ON. The default value is ON.
Note.
- Press [ENT] or [IRIS OPEN] key to save settings and exit to previous menu.
- Press [Esc] or [IRIS CLOSE] key to go to previous menu without saving any settings at any time
<<<<< Main Menu >>>>>
██████████████████████████
SYSTEM >
DISPLAY >
DOME >
►FOCUS/ZOOM
►CAMERA
> W-BALANCE
ALARM
EXPOSURE
EXIT
ADVANCED
RESET
<< FOCUS/ZOOM SETUP >>
██████████████████████████
►FOCUS
: TRIGGER
Z.SPEED : LOW
D.ZOOM : ON
██████████████████████████
<Save and Exit>
<Exit without Saving>
CAMERA : W – BALANCE
This feature automatically processes the viewed image to retain color balance over temperature range.
The default setting for white balance is auto.
White Balance has following four modes.
ATW
This mode automatically adjusts color temperature range from 1800K to 10500K. It can
select INDOOR, OUTDOOR and MERCURY mode.
INDOOR
Automatic White Balance for in door. 3200K base mode.
OUTDOOR
Automatic White Balance for outdoor. 5800K base mode.
MANUAL
R/B gain can be adjusted by manual.
AWC
Whenever this mode is sent, camera becomes ATW mode to adjust color temperature.
After it finished, color temperature is fixed.
*Note
- Auto white balance will malfunction at below condition.Very dark or shiny area (clear sky, sunset) Direct shot of fluorescent
lamp or much difference brightness area.
- Press [ENT] or [IRIS OPEN] key to save settings and exit to previous menu or Press [Esc] or [IRIS CLOSE] key to exit to
previous menu without saving any settings at any time.
<<<<< Main Menu >>>>>
██████████████████████████
SYSTEM >
DISPLAY >
DOME >
FOCUS/ZOOM
►CAMERA
>
►W-BALANCE
ALARM
EXPOSURE
EXIT
ADVANCED
RESET
<< WB SETUP >>
██████████████████████████
►MODE
: AUTO
R GAIN :
B GAIN :
██████████████████████████
<Save and Exit>
<Exit without Saving>
