OPERATION & PROGRAMMING
17
DOME : PATTERN
Pattern function is that a camera memorizes the path by joystick of controller for assigned time
and revives the path exactly as it memorized. 8patterns are available.
To program a pattern :
1. Press the MENU key
2. Select DOME and select PATTERN using joystick.
3. Use the joystick to position the cursor NO.xxx. Move left or right to select pattern ID.
4. Press the [TELE] button or twist the joystick clockwise to start to learn.
5. Follow the directions displayed on the monitor.
6. To save, press [ENT] or [IRIS OPEN] key. To cancel press [CLR] or [IRIS CLOSE] key.
7. Edit title. Refer to [TITLE DEIT] section in this manual.
To clear a pattern :
1. Use the joystick to position the cursor beside NO.xxx. Move the Joystick left or right to
select a pattern ID.
2. Press the [WIDE] key or turn the joystick counterclockwise.
* You can access this pattern setting menu with [PRTN] key in supplied controller.
<<<<< Main Menu >>>>>
██████████████████████████
SYSTEM >
DISPLAY > GENERAL
►DOME
> MOTION
CAMERA > HOME
ALARM
PRESET
EXIT
TOUR
►
PATTERN
SCAN
<< PATTERN SETUP >>
██████████████████████████
►NO.001
:
█
• • • • • • •
TITLE
:
-TIME
:
██████████████████████████
<Save and Exit>
<Exit without Saving>
DOME : SCAN
You can make camera to move between 2 preset positions repeatedly.
When Scan function runs, camera moves from the preset assigned as the 1st Point to the preset
assigned as the 2nd point in the direction of the path chosen by the user.
Then camera moves from the preset assigned as the 2nd point to the preset assigned as the 1st
point in the reverse direction.
To program a scan :
1. Press the MENU key .
2. Select DOME and select Scan using joystick.
3. Use the joystick to position the cursor beside NO.xxx. Move left or right to select a
scan number.
4. Press the [TELE] key or turn the joystick clockwise to start to setup start and stop position.
5. Edit a title. Refer to [TITLE EDIT] section in this manual.
6. Select scan speed. Scan speed is from 1step~9step. (default: 5 step)
7. Edit a dwell time - You can select the time from 1~240 sec.
To clear a scan :
1.Use the joystick to position the cursor beside NO.xxx. Move the joystick left or right to
select a scan number.
2. Press the [WIDE] key or turn the joystick “counterclockwise”. How to activate a scan
Press the specific number key and then press [SCAN].
Ex) [1]+[SCAN]
You can also access this menu with [SCAN] key.
Note.
-Press [ENT] OR [IRIS OPEN] key to save settings and exit to previous menu or Press [Esc] or [IRIS CLOSE]
key to go to pervious menu without saving any settings at any time.
<<<<< Main Menu >>>>>
██████████████████████████
SYSTEM >
DISPLAY > GENERAL
►DOME
> MOTION
CAMERA > HOME
ALARM
PRESET
EXIT
TOUR
PATTERN
►
SCAN
<< SCAN SETUP
>>
██████████████████████████
►NO.001
:
█
• • • • • • •
TITLE
:
SPEED
: 5
DWELL
: 005 sec.
-MODE
:
-START :
-STOP
:
██████████████████████████
<Save and Exit>
<Exit without Saving>
