List-Magnetik GmbH
EN MP-2000 2022-03.doc
19
O
PTIONAL
TOP-PRINT4
T
HERMAL
D
ATA
P
RINTER
Small, battery powered printer for measurement values and statistics.
Technical data
Printing method:
Thermal printer
Characters/line:
32
Transfer speed:
38400 baud
Interface:
Bluetooth class 2 and Serial
Paper:
Thermal paper 57 mm wide – max. 10 m long
Power supply:
Li-Io rechargeable battery
(approx. 60 hours of operation)
Dimensions:
100 x 75 x 45 mm
Weight
210 g
Operating instructions
1.
Connect the printer cable to the left USB port (
COM
) at the printer.
2.
Connect the printer cable to the device (serial port next to the probe).
3.
Insert paper roll.
4.
Switch on printer (is it already charged? See below).
5.
Switch on the device.
Charging the built-in Li-Io rechargeable battery
When delivered new the Li-Io rechargeable battery in the TOP-PRINT4 must be
charged up before first-time use. The rechargeable battery is charged up with the
mains charger supplied. The cable from the mains charger is plugged into the con-
nection socket on the right-hand side.
The charging time should be at least 4
hours.
The blue LED blinks during the charging process; it lights steadily when the
battery is fully charged. The charger then switches automatically to maintenance
charging mode. The capacity of the rechargeable battery is sufficient for approx. 60
hours of operation.
Notes on operation
1.
The paper is manually transported using the
Feed
button. After completion of the
printout the paper strip is transported out of the housing by pressing this button
and can then be cut off cleanly.
2.
Faulty printout: The
TOP-PRINT4
must be charged up again if individual lines of
the printout are not printed correctly.
3.
Inserting a new paper roll: Open the cover, Insert the paper roll, pull out the end
of the paper, Close the cover.
