4. MEASURING PROCEDURE
4-1 ANEMOMETER
1) Install the " Vane Probe Plug " ( 3-9, Fig. 1 ) into the
" Anemometer Socket " ( 3-13, Fig. 2 ).
2) Power on the meter by pressing the " Power Button "
( 3-2 , Fig. 1 ) once.
3) Hold the " Vane Probe Handle " ( 3-9, fig. 1 ) by
hand and let the " Vane Probe Head " ( 3-8, Fig. 1 )
face against the measuring air flow source, then the
" Display " ( 3-1, Fig. 1 ) will show air velocity and
the air temperature value together.
Measuring Consideration :
The yellow dot mark on the " Sensor
head " indicates the direction that need to
face against the air flow.
The anemometer air velocity unit is default to " m/s ".
If intend change to the other air velocity unit such as
km/h, mph, FPM or knot with default, the detail
procedures please refer
5-1 Change the measuring unit, page 14.
The anemometer air temperature unit is default to " ".
℃
If intend change temperature unit to " ", the detail
℉
procedures please refer
5-3 Change the Temp , unit, page 14.
℃ ℉
9
