5-4 Auto power On/Off
( Lower display show " OFF " )
a. Use " Function button " ( 3-3, Fig. 1 ) to select " YES "
or " no ".
* YES : Auto power off.
* no : Auto power disable.
b. After select the desiring function ( YES or no ), press the
" Enter button " ( 3-4, Fig. 1 ) to save the function with
default.
5-5 Code entering for the further calibration
usage
( Lower display show " CodE" )
The upper display will show 100.
The code setting is used for the further calibration usage.
It do not enter any new code, just press the " Enter button
" ( 3-4, Fig. 1 ) will finish the Advanced Setting Procedure.
15
