11
Intercom pairing with a different Twi-
ins
®
D1, Twiins
®
D2 or a different Blue-
tooth
®
audio receiver.
Dual Link: Pairing as an intercom while maintaining
hands-free functionality:
• Complete pairing with the phone as described in the
paragraph above “Pairing to a mobile phone or GPS
navigator”.
• Switch off Bluetooth
®
on the phones.
• Make sure both devices to be paired are switched off.
• Press and hold the control button (1b) of the Twiins
®
D3 device until the LED indicator begins flashing in Red
and Blue.
• Press and hold the control button (1b) of the Twiins
®
D1 or Twiins
®
D2 device until the LED indicator begins
flashing in Red and Blue. If you are using a different de-
vice, put it in pairing mode.
• Briefly press the control button (1b) of the Twiins
®
D3
device once. After a few seconds, both devices will pair
and intercom functions will be activated. Once paired,
it is recommended for you to switch off the Twiins
®
D3
device and switch it back on so that it operates cor-
rectly with your phone and as an intercom.
The other intercom device will receive an acoustic warn-
ing signal.
• Activate Bluetooth
®
on the phones again. Depend-
ing on the phone, it will automatically detect the device
paired. Otherwise, you will need to select it manually.
NOTE
: When two Twiins
®
devices are in intercom mode,
incoming call functionality with their respective mobile
phones will be maintained. In case a call is received,
intercom functionality will stop and resume once the call
has ended.
Single Link: Pairing as an intercom only (without
hands-free features):
• Make sure both devices are switched off.
• Press and hold the control button (1b) of the Twiins
®
D3 device until the LED indicator begins flashing in Red
and Blue.
• Press and hold the control button (1b) of the Twiins
®
D1 or Twiins
®
D2 device until the LED indicator begins
flashing in Red and Blue. If you are using a different de-
vice, put it in pairing mode.
• Briefly press the control button (1b) of the Twiins
®
D3
device once. After a few seconds, both devices will pair
and intercom functions will be activated. Once paired,
it is recommended for you to switch off the Twiins
®
D3
device and switch it back on so that it operates cor-
rectly with your telephone and as an intercom.
The other intercom device will receive an acoustic warn-
ing signal.
Intercom functions:
Activating and deactivating intercom functions be-
tween two Twiins® devices:
once both Twiins
®
devices
have been paired and switched on, press the control
button (1b) of the Twiins
®
D3 for two seconds to activate
or deactivate intercom functionality.
Adjusting the volume for intercom functions:
you can
adjust the volume by briefly pressing the control button
(1b). It will then cycle through three levels: LOW < ME-
DIUM < HIGH < LOW…
Technical Specifications
Bluetooth
®
: 2.1 Class 2
Profiles:
A2DP stereo
, HSP, HFP, EDR
Intercom frequency: 2.4 GHz
Battery: Lithium polymer, allowing for up to 7 hours of
talk time and 200 hours of standby time (depending on
use and configuration of the device)
Care and maintenance
The Twiins
®
D3 device uses components with the lat-
est technology and is manufactured to high standards.
To keep your device from inadvertently becoming dam-
aged, please read the following recommendations care-
fully:
• Do not attempt to open any of the system compo-
nents, since the electronic parts inside it may become
damaged. Do not attempt to open or change the bat-
tery as it may be dangerous.
• Keep the Twiins
®
D3 out of the reach of children.
• Keep the Twiins
®
D3 in a dry place. Humidity and con-
densation may damage the electronic circuits.
• Avoid exposing the device to extreme temperatures.
Intense cold may create condensation inside the com-
ponents as these warm up. Extreme heat may damage
the battery, circuits or casings.
• Do not drop, hit or bend the components as the inter-
Summary of Contents for D3
