40
Network Camera User Manual
2. Enable target counting and select the snapshot type and the detection target.
Detection Target
: Select the target to calculate. Human, motor vehicle and non-motor vehicle
can be selected.
Staying Threshold
: When the targets (human/vehicle) staying in the specified area exceed
the threshold, alarms will be triggered.
Counting Reset
: The current number of the target counting can be reset. You can choose to
reset the counting daily, weekly or monthly. Click “Reset” to manually reset the current
number of crossing line people/motor vehicle/non-motor vehicle counting.
3. Set alarm trigger options. The setup steps are the same as fire detection. Please refer to
4. Set the area of the target counting. Click the “Area” tab to go to the interface as shown
below.
