3
Network Camera User Manual
③
Double click the IP address and then the system will pop up the IE browser to connect
IP-CAM. After you read the privacy statement, check and click “Already Read”. Then
activate the device.
Please self-define the password of admin according to the tip.
If “Activate Onvif User” is enabled, the ONVIF user can be activated simultanously. When
you connect the camera through the ONVIF protocol in the third-party platform, you can use
the default username and the password set above to connect.
After that, follow directions to download, install and run the Active X control if prompted.
Re-connect your camera via IE browser and then a login box will appear.
Please enter the user name (admin) and password. Then select the stream type and language
as needed.
Stream Type: The plug-in free live view only supports1080P or lower resolution.
The safety questions should be set after you click “Login” button. It is very important for you
to reset your password. Please remember these answers.
