4
Network Camera User Manual
If you forget the admin password, you can reset the password by clicking Forget Password on
the login page. Then you can reset the password by the safety questions and answers you set.
You can set the account safety question during the activation, or you can go to
Config
Security
User, click Safety Question, select the safety questions and input your
answers.
2.1.2
Directly Access through IE
The default network settings are as shown below:
IP address:
192.168.226.201
Subnet Mask:
255.255.255.0
Gateway:
192.168.226.1
HTTP:
80
Data port:
9008
Use the above default settings when logging in the camera for the first time. Directly connect
the camera to the computer through network cable.
①
Manually set the IP address of the PC and the network segment should be as the same as
the default settings of the IP camera. Open the network and share center. Click “Local Area
Connection” to pop up the following window.
