81
TRANSMISSION OIL - LEVEL
Check the transmission oil level periodically.
1. Place the vehicle on centre stand on a flat surface.
2. Wipe-off the surroundings of oil level screw.
3. Remove the transmission oil level screw along
with a gasket from the rear end of crankcase L.
4. Check for the flow of oil from oil level hole.
5. If the level is less (if there is no oil flow), top-up
with ‘TVS TRU4 SKUUTA oil (SAE 10W30 API-SL,
JASO MB)’ till the oil just starts to flow out from
the oil level hole.
6. Wipe out the oil traces with a clean cloth to
prevent dust accumulation.
7. Replace the fiber washer while reassembling the
oil level screw.
If the vehicle is driven with less transmission oil, the
transmission components of engine will be severely
damaged.
Check the oil level as per the schedule to avoid costly
damage. Do not fill excess oil may cause oil leak. Always
use ‘TVS TRU4 SKUUTA oil only (SAE 10W30 API-SL,
JASO MB)‘.
Caution
6. Wipe out the oil traces with a clean cloth to
prevent dust accumulation.
7. Assemble back the gauge oil level.
If the vehicle is driven with less engine oil, the engine
components will be severely damaged.
Check the oil level as per the schedule to avoid costly
damage. Do not fill excess oil may cause oil leak. Always
use ‘TVS TRU4 SKUUTA oil only (SAE 10W30 API-SL,
JASO MB)‘.
Caution
