17
If any of the warning is noticed, contact nearest
TVS Motor Company Limited Authorised Main
Dealer / Authorised Dealer.
9. Mode and Set buttons
Mode button is used to change the connected
instrument cluster’s display to various modes like
‘Street mode’, ‘Race mode’, ‘Ride stats mode’, for
clock setting and Bluetooth pairing etc.
Set button is used to ‘Set’ or ‘Erase the stored value’
in various modes.
The set button is also used to find the estimated
time of arrival, clock setting, Bluetooth pairing
and distance remaining to reach the destination in
navigation mode.
When the MODE button in the instrument cluster
is pressed, the mode change will happen ie. when
the display is in Street mode, if the MODE button
is pressed, it will change to Race mode and the
vice-versa is also applicable.
The mode change via instrument cluster is possible
even with the engine ‘OFF’ condition. Even if the
engine is not started, the mode change is possible
via MODE button.
If the vehicle speed crosses 2 kmph, then mode
change will not be possible using mode button.
The malfunction indicator will continue to remain
switched ‘ON’ after self checking of cluster until the
engine is started. But after starting the engine it will get
switch ‘OFF’ if no malfunction is detected.
Note
7. Smart-connect notification LED ( )
A green colour LED indicator glows
and indicates
whenever there is an incoming call or message
received by the ‘Smart Phone’ paired with your
TVS NTORQ 125 Race XP.
This indicator will go ‘OFF’ once the user read the
message / incoming calls details.
8. Alpha numeric display
The customized alpha-numeric display indicates
different modes of instrument cluster, vehicle
information and Smart-connect related messages,
when the ignition key is turned ‘ON’ and vehicle
running condition. Ride mode display change is
possible after engine ‘ON’ only.
