16
Power indicator (amber lamp) indicates that the
vehicle is running in power mode which results in
reduced fuel economy.
Power indicator will also glow if engine is stalled
using kill switch.
4. Turn signal indicator right ( )
Flashes when the ‘right’ side turn signal indication is
activated.
5. Low fuel indication ( )
The low fuel indicator glows when the fuel level goes
down and a warning message ‘FUEL EMPTY’ will be
displayed continuously in the alpha numeric display.
When the fuel level reaches very low level the
message ‘FUEL EMPTY’ starts blinking for the
user’s attention to refill the fuel.
Caution
When the low fuel warning indicator lamp glows fill fuel
in the fuel tank immediately to avoid engine switch ‘OFF’
/ damage to fuel pump which leads to replacement of
pump without warranty.
Always ride the vehicle in ‘Economy Mode’ for better
fuel efficiency.
Whenever the engine is kept running in idle mode for
more than 20 seconds approximately, the power mode
indicator blinks and informs you that the fuel is getting
wasted and the engine needs to be switched ‘OFF’ to
save the fuel and the power mode indicator blinking
(power mode) to green light glowing (economy mode)
when the throttle position is changed / increased.
Note
2. High beam indicator lamp ( )
Glows when the head lamp is activated in high beam
or pass-by condition.
3. Turn signal indicator left ( )
Flashes when the ‘left’ side turn signal indication is
activated.
6. Malfunction indicator lamp - MIL ( )
The MIL indicator will be turned ‘ON’ whenever the
ECU detects a fault in the system (general warning)
and the MIL indicator will blink for the fault whenever
it is required the user to take action immediately
(hazard warning).
