24
Setting the digital display
Every press of the Mode button changes the display
to other mode. Follow the below procedures to
change the display to desired mode.
If ignition is turned OFF when the meter is in ‘ODO’
or ‘TRIP’ meters, then the respective meters will be
displayed in the next ignition ON. If any other modes
other than these were set during ignition OFF, then
‘ODO’ meter will be displayed in the next ignition ON.
1. In ‘ODO’ mode, press the Mode button once and
twice to enter ‘ ’ and ‘ ’ meters
respectively.
• To reset any of the trip meter while ensuring
the display is in ‘TRIP 1’ or ‘TRIP 2’, press and
hold the Set button for a few seconds.
2. Press the ‘Mode’ button till the ‘ ‘ display
appears to set the ‘HIGH SPEED’ indicator mode.
• To reset the high speed recorded, keep the
display in ‘HIGH SPEED’ mode and press the
Set button for a few seconds.
4. Press the Mode button till the display changes to
‘ ’ to set the ‘SHORTEST TIME’ indicator.
• To reset the ‘LAST RECORD’ of the shortest
time, press and hold the Set button for few a
seconds.
5. Press the Mode button once to change the
display to ‘ODO’ mode again.
Digital clock setting
1. Press and hold the Mode button till the ‘Clock’
icon blinks in the display.
2. Now, press the Set button so that the hour digit
of the clock starts blinking.
3. Once again press the Mode button to increase
the hours while the hour digits of clock are
blinking.
4. Now, press the Set button so that the hours is set
and the minute digits of the clock starts blinking.
5. Once again press the Mode button to increase
the minutes while the minute digits of the clock
are blinking.
6. Else, press the Set button to set the minutes of
the clock and the hour format ‘AM’ or ‘PM’ starts
blinking on pressing the Set button.
Mode and set buttons will not work when the vehicle
speed exceeds above 10 km/h in the respective modes.
