21
21
Whenever the vehicle speed crosses the previous
achieved high speed the speedometer flashes the
high speed data at the rate of 2 Hz till the speed
comes less than 3 km/h. This will happen in all modes
except shortest time mode.
11c. Trip meter 1 & 2
In ODO mode, press mode button once and twice to
enter ‘TRIP 1’ and ‘TRIP 2’ meters respectively.
Trip meter indicates the trip distance travelled in
kilometer. The digit after the dot mark denotes the
one tenth of a kilometer.
Provision to measure two different distance ‘TRIP 1’
or ‘TRIP 2’ is provided for the users to use as per
their convenience.
11d. High speed indicator
High speed indicator records the maximum speed
(top speed) achieved by the rider so far. You can reset
and record the new speed if required. Refer page No.
24 for resetting the high speed data.
Set the meter in ‘HIGH SPEED’ mode to know the
maximum speed achieved by any user so far.
Maximum speed recorded so far will be displayed
whenever the meter is set in ‘HIGH SPEED’ mode.
This display will go off automatically once the vehicle
starts moving (>3 km/h) and it will continue the normal
operation. Max speed recorded will be stored until
manual reset. If the high speed is reset, the speed value
will be shown as ’0’.
