TVLogic TVC-FG301E, User Manual

Page: 23 / 63

Full HD Motion Video Camera 23
PRESET
Preset is a function that saves and recalls the video status, white balance, and exposure adjusted by pan
/ tilt and zoom / focus.
Number of assignable presets depends on its protocol.
When using VISCA protocol, pattern, swing, group will be carried out in each range from 1 to 8.
When using PELCO D/P protocol, preset will be carried out in its range from 131 to 160 and 95.
*Preset setup range may vary depends on the controller.
ex) TVR-200H can set up to 255 Presets.
You can set the label separately for each preset. The label is automatically set to Blank when you directly
specify the preset position using the IR remote and the controller. If you want to change each setting
value, please use the menu.
You can also set, run and delete the preset positions from within the menu.

Interlocking operation with the camera controller(based on TVR-200H)
Set Preset
IR Remote: Preset button
￫
Press and hold the SET Preset No. Button
Controller: Press and hold the PRESET Preset No. Button
Run Preset
IR Remote: Preset button
￫
Preset No. Button
Controller: PRESET button lights up
￫
Number pad
Delete Preset
IR Remote: Use the OSD menu
Controller: PRESET button lights up
￫
Press and hold the RESET Preset No.
Button
VISCA Preset 255
PELCO D/P Preset 255
 Preset 95 allows you to enter MENU.
 Preset 131~138 perform pattern 1~8.

Preset 141~148 perform swing 1~8.
 Preset 151~158 perform group 1~8.