TVLogic TVC-FG301E, User Manual

Page: 14 / 63

1
4
User Manual
③ Communication Protocol-PROTOCOL Setup
Change the communication protocol as shown below.
: Factory Default
Set the protocol correspond to the controller.
Be sure to change the protocol while the power is off.
④ Output Video Format-SYSTEM SELECT Setup
Set the video output format by changing the switch as shown below.
Make sure to change the format while the power is off.
- HDMI and HD/3G-SDI simultaneous output.
Protocol BAUDRATE Switch
VISCA
9600 bps 0
38400 bps 1
PELCO-D
2400 bps 2
9600 bps 3
38400 bps 4
PELCO-P
4800 bps 5
9600 bps 6
Output Video Format Switch Output Video Format Switch
1920x1080p60 0 1920x1080p50 8
1920x1080i60 1 1920x1080i50 9
1920x1080p30 2 1920x 1080p25 A
1280x720p60 3 1280x720p50 B
1280x720p30 4 1280x 720p25 C
1920x1080p59.94 5
Reserved
D
1920x1080i59.94 6 E
1280x720p59.94 7 F