TVLogic TVC-FA301N, User Manual

Page: 18 / 64

PRESET
Preset is a function that saves and recalls the video status, white balance, and exposure adjusted by
pan / tilt and zoom / focus.
Number of assignable presets depends on its protocol
When using VISCA protocol, pattern, swing, group will be carried out in each range from 1 to 8.
When using PELCO D/P protocol, preset will be carried out in its range from 131 to 160 and 95.
*Preset setup range may vary depends on the controller.
ex)TVR-200H can set up to 255 Presets.
You can set the label separately for each preset. The label is automatically set to Blank when you
directly specify the preset position using the IR remote and the controller. If you want to change each
setting value, please use the menu.
You can also run, set position, and delete the preset in the menu.

Interlocking operation with the camera controller(based on TVR-200H)
Set Preset
IR remote: Preset button
￫
SHIFT +Preset No.
Controller: PRESET button + Number pad (Press simultaneously)
Run Preset
IR remote: Preset button
￫
Preset No.
Controller: PRESET button lights up
￫
Number pad
Delete Preset
IR remote: Use the OSD menu
Controller: PRESET button lights up
￫
RESET + Number pad (Press simultaneously)
VISCA
Preset 255
PELCO D/P
Preset 224

Preset 95 allows you to enter MENU

Preset 131~138 perform pattern 1~8

Preset 141~148 perform swing 1~8

Preset 151~158 perform group 1~8