18
Installation Check
1. Before applying power, make sure that there is no abnormality in wiring.
2. Make sure to change the camera and controller settings (protocol and video output format, etc.)
while the power is off.
3. Check that the communication between the camera and the controller (RS-232C, RS422) match.
4. Match the protocols and transmission speed of the camera and controller.
Operation Check
Enter the camera menu(OSD) to confirm or change the setting.
◈ To confirm the current camera ID, protocol, resolution and other camera information
Go to
<System Info.> menu.
◈ The picture is reversed when the camera is put upside down.
Go to
<Image> menu and turn on the Image Flip function.
◈ When the camera is mounted upside down, it moves in the opposite direction to the controller.
1) Press and hold the [MENU] button of the TVR-200H.
2) Go to <Motion/Action> menu and select <Motion> menu to invert the PT Direction(Pan Dir).
◈ Unnecessary characters continually appear on the screen?
Go to <
Display> menu and turn off the PTZ Information, Flip status, Action Title, Preset Label and IR Info..
Or turn off the Display All.
◈ The basic movement of the PTZ camera is much faster than what is used to be.
Go to <Motion/Action> menu and select <Motion> menu to slow down the PT Max Speed.
◈ Want to be able to distinguish the background and the subject more smoothly than the existing
PTZ camera?
1) Go to <Picture> menu to turn off the HR Mode.
2) Go to <Image>menu and decrease the Aperture value.
◈ Want to factory reset everything in the camera?
Go to <System Info.> menu and then <Additional Info.> menu. Select <System Initialize> menu to activate
the Factory Default function.
Refer to Page 15 for more
information.
