8
03 CONTROLS & FUNCTIONS
LVM-181S FRONT
[FRONT TALLY] Lamp
-
Tally lamp that can be toggled in green or red using the
REMOTE(RJ-45) port.
[POWER INDICATOR] Lamp
- Indicates the condition and power status of the unit.
- The lamp turns off when the power is disconnected.
- Standby mode is indicated by a red LED light.
- Normal (active) mode is indicated by a Green LED light.
- If the power is disconnected and then connected again
while the monitor is working, it is restored to the previous
condition.
[POWER]
- Used to turn the power on and off.
[SOURCE]
-
Used to select the desired input source or used to select
the PBP Mode. Use the Knob to select and active the input
mode or PBP mode.
[SCAN]
-
Used to change the scan mode.
[ASPECT]
-
Used to change the various display ratio between 4:3
and 16:9.
-
When the aspect ratio of the input signal is not 16:9, it
is fixed to 16:9.
[MARKER]
-
Used to activate/deactivate the Marker.
-
The desired marker can be displayed on the screen
properly when the type of marker selected from the main
menu.
[F1] ~ [F3]
-
These buttons are the shortcut keys in order to activate
preassigned functions immediately.
[MENU/EXIT]
-
Used to activate the OSD menu.
-
When the OSD menu is activated, press this button to
exit from the menu.
[KNOB] (UP/DOWN/ENTER)
-
Used to move within the menu when OSD menu is
activated and is also used to decrease or increase the
value of the selected feature.
-
Press the Knob to select the main menu and sub menus.
[USB] (USB-A)
-
This terminal is used to upgrade the firmware or color
calibration made by TVLogic.
[AUDIO OUT] (Phone jack)
-
Selects the Left/Right Audio disembedded signal output
or HDMI input signal or external stereo signal is output
through the internal speaker or the phone jack.
Multi Format LCD Monitor
