27
05 Menu Operations
[7] WAVEFORM & FOCUS
LUMA(Y’) ZONE CHECK
-
Analyzes the Luma(Y’) level of the input image and
displays the selected zone on the screen.
-
Available modes are [Color Pattern] and [Zebra Pattern].
-
After each pixel’s Y’ level is analyzed, it is displayed as a
certain color or zebra pattern according to the Index on
the right side of the screen.
-
When a pixel’s Y’ level is under 0%(16), the pixel is
displayed as green color or green diagonal lines, and
over 100%(235) as red color or red diagonal lines.
-
When the Y’ level of a pixel is between 0~100%, the pixel
is displayed as Gray level, except for selected Luma Zone.
-
In the [Color Pattern] mode, the zone the user adjusted
is displayed as Yellow (10% lower zone), Pink (±2.5%),
Cyan (10% upper zone).
-
In the [Zebra Pattern] mode, ±5% of the selected Y’ Level
will be displayed as diagonal lines.
LUMA(Y’) ZONE ADJUST
-
Used to set the Y’ level to be colored Yellow, Pink and
Cyan in [Color Pattern] mode, or to set Y’ level zone to
be displayed with diagonal lines in [Zebra Pattern] mode
simply by scrolling with the Knob.
-
Available values are [0]% ~ [100]%.
FOCUS ASSIST
-
Focus Assist helps the shooters to easily find out the
exact area in the picture that is in focus, simply by adding
colors on the boundaries of the subject in the picture.
-
Available modes are [COLOR ON] and [MONO ON].
COLOR ON: The boundary of the area with good focus
is colored with the designated color.
MONO ON: The boundary of the area with good focus
is colored with the designated color, while the rest of
the areas(pixels) receive only Y’(Luma) signals and
become black & white image.
FOCUS ASSIST COLOR
-
Used to select a color for Focus Assist among [RED],
[GREEN], [BLUE], [WHITE].
-
This feature is available only when the [FOCUS ASSIST]
mode is activated.
FOCUS ASSIST LEVEL
-
Used to set the edge difference value between the edges
in an image.
-
Available values are from [0] to [100]. Larger value means
more sophisticated detail detection.
-
The color designated in [FOCUS ASSIST COLOR] menu is
displayed on the boundaries when the difference of the
edges exceeds the previously set value.
-
This feature is available only when the [FOCUS ASSIST]
mode is activated.
LVM-181S
Multi Format LCD Monitor
