TVLogic LQM-241W, Operation Manual

Page: 25 / 36

Multi Format LCD Monitor 25
1. Four different aspect modes are available.
When input signal is SDI or COMPONENT:
1) 4:3 mode : Cuts left and right of the original
image to fit to 4:3 aspect ratio.
2) 16:9 mode : Stretches the image in “1) 4:3
mode” to fit to 16:9 aspect ratio.
NTSC and PAL signals are known to be 4:3 aspect
ratio signals, but their aspect ratio is not exactly
4:3. Therefore, select “1) 4:3 mode) to display
the exact 4:3 aspect ratio, select “3) 4:3 mode
(extend)” to display the image without altering
the source image.
ASPECT button lamp status: 1 - 1) Off, 1 - 2 : On
2. When input signal is COMPOSITE 1/2/3,
S-VIDEO, RGB, DVI ANALOG, DVI DIGITAL or
HDMI mode, all display the image in 4:3 and 16:9
without altering the source image.
3. For the above aspect modes, ZERO SCAN is
the standard scan mode. And, in the other scan
modes, aspect ratio changes using the image in
its selected scan mode.
̻
Used to select single screen in multi
screen mode.
̻
Press [SCREEN SEL] button once to
highlight SCREEN1 and press it again to go
to next screen.
̻
To switch the input source press
[ANALOG] or [MODE] button. Also, Picture
and Color settings for individual screen can
be controlled in OSD menu.
̻
In multi screen mode without selecting
any single screen (All Screen), changed
values for the settings will affect on all
screens.
6. Button Functions
[5] ASPECT [6] SCREEN SEL BUTTON
SCREEN 2
SCREEN 3 SCREEN 4
<SCREEN 1 select> <SCREEN 2 select>
SCREEN 1
SCREEN
3
SCREEN
4
SCREEN 1
SCREEN
2