TVLogic LQM-241W, Operation Manual

Page: 19 / 36

Multi Format LCD Monitor 19
LQM-241W TVLogic SYSTEM 1/3
SET DEFAULT
USER CONFIG SET
BACK LIGHT
AUDIO VOLUME
AUDIO CHANNE
SERIAL NUMBER
BOARD VER
USER1
25
10
CH1 + CH2
---------
0001 0101 0.01 4
1080/59.94i SDI-A
[6] SYSTEM
5. Menu Operations
̻
SET DEFAULT
- User can use SET DEFAULT menu to initialize
to factory setting.
- Set default items are BRIGHT, CONTRAST,
CHROMA, PHASE and APERTURE.
̻
USER CONFIG SET
- Used to save and apply three kinds of user
configuration.
- Available modes are USER1, USER2 and
USER3.
- Effective items for each USER1, USER2
and USER3 settings are [MARKER] menu of
MARKER, CENTER MARKER, SAFETY AREA,
MARKER MAT and MARKER COLOR and
[PICTURE] menu of BRIGHT, CONTRAST,
CHROMA, PHASE and APERTURE.
̻
BACK LIGHT
- Used to control the backlight level of the
LCD panel.
- Available values are between 0 ~ 100.
̻
AUDIO VOLUME
- Used to control the embedded audio output
volume for the internal speakers and [AUDIO
OUT] terminal on the rear of the monitor.
- Available values are between 0 ~ 30.
̻
AUDIO CHANNEL
- Used to set embedded audio channel.
- Available values are OFF, CH1 , CH1+CH2, ~,
CH15+CH16 and AUDIO IN.
- Audio out of Screen 1 is controlled in multi
mode.
- In Multi mode, the audio of Screen 1 will be
out.
̻
SERIAL NUMBER
- Serial number of the product.
̻
BOARD VER
- Firmware version of the main board.
GPU VERSION
FPGA VERSION
MCU VERSION
KEYPAD VERSION