![TVLogic LQM-241W Operation Manual Download Page 20](http://html.mh-extra.com/html/tvlogic/lqm-241w/lqm-241w_operation-manual_1183357020.webp)
20 Multi Format LCD Monitor
LQM-241W
TVLogic
SYSTEM 2/3
KEY LED
OSD DISPLAY
OSD POSITION
UMD DISPLAY
UMD CHARACTER
TIME CODE ENABLE
CLOSED CAPTION
MONITOR ID
ON
3 SEC
CENTER
OFF
CHANNEL L1
OFF
OFF
0 1 2 3
1080/59.94i
SDI-A
̻
KEY LED
- Used to control key LED On/Off.
- If the button with LED is pressed with the
KEY LED Off, LED comes on but goes off after 5
seconds later.
̻
OSD DISPLAY
- Used to control the OSD display time.
- Available values are 20 SEC, 6 SEC and
CONTINUE.
̻
OSD POSITION
- Controls the OSD position.
- Available positions are CENTER, Top-
Right(R-T), Bottom-Right(R-B), Bottom-
Left(L-B) and Top-Left(L-T).
̻
UMD DISPLAY
- Used to set the input source ID mode.
- Available modes are OFF, UMD, ANC and
DYNAMIC UMD.
* UMD : Displays user customized 8 characters
on screen.
* ANC: Displays characters embedded in SDI
signal.
* DYNAMIC UMD: Displays incoming
characters or tally signal from TSL Protocol.
̻
UMD CHARACTER
- Customizes the characters for Under Monitor
Display.
- Maximum of 8 characters are available.
̻
TIME CODE ENABLE
- Used to display the TIME CODE.
- Available modes are OFF, VITC and LTC.
* In multi screen mode, if the same input is
displayed onto 2 or more screens, TIME CODE
will be only seen on the first screen displaying
the same input.
For example, if SDI-A input is displayed on
SCREEN1 and SCREEN2 in QUAD mode, TIME
CODE will be only displayed on SCREEN 1.
̻
CLOSED CAPTION
- Used to control closed caption.
- Available modes are OFF, 708, 608(LINE21)
and 608(ANC).
* 608 : CEA-608-B, 708 : CEA-708-C standards
display only.
̻
MONITOR ID
- Used to set the ID of each monitor for the
TVLogic control protocol or DYNAMIC UMD
using RS-422/485 communication.
- Four consecutive IDs are available for
MONITOR ID.
- Available values are groups of 0 1 2 3 ~ 96
97 98 99.
- For example, If MONITOR ID is selected as 0 1
2 3, ID# 0 is for SCREEN1 and ID# 1,2 and 3 are
for SCREEN 1,2 and 3.
[6] SYSTEM
5. Menu Operations
Single Screen or Split Screen - SCREEN 1
Spilit Screen-SCREEN 2
Spilit Screen-SCREEN 3
Spilit Screen-SCREEN 4
Summary of Contents for LQM-241W
