TVLogic F-7HS Operation Manual Download Page 21

Page: 21 / 45

05 MENU OPERATIONS

FHD Hight Bright Field Monitor

[6] AUDIO

• VOLUME

- Used to control the output volume for the

[AUDIO OUT] on the side of the monitor.

- Control range is from 0 to 30.

• Em. AUD LEFT (Audio Left)

- Used to set embedded audio channel for left

audio out of [AUDIO OUT] terminal on the side

of the monitor.

- Available options are [CH 01] to [CH 16].

* In the HDMI mode, Left is set to [CH 01].

• Em. AUD RIGHT(Audio Right)

- Used to set embedded audio channel for right

audio out of [AUDIO OUT] terminal on the side

of the monitor.

- Available options are [CH 01] to [CH 16].

*In the HDMI mode, RIGHT is set to [CH 02].

• LEVEL METER

- Used to set the Level Meter for the embedded

audio.

- Available options are :

SDI Input : [Off]-[16CH(Hor.)]-[16CH(Ver.)]

HDMI Input: [Off]-[2CH(Hor.)]-[2CH(Ver.)]

* 16 CH(HOR.) : Displays 8 channels on top

left and 8 channels on top right of the screen

horizontally.

* 16 CH(VER.) : Displays 8 channels on center

left and 8 channels on top right of the screen

vertically.

* In the HDMI mode, only 2 channels are displayed.

• ALM DISPLAY (Audio Level Meter Display)

- Used to set the display method for audio level

meter.

- Available modes are [GROUP] and [PAIR].

* In the HDMI mode, the mode is set to [PAIR].

• ALM REFERENCE (Audio Level Meter Reference)

- Display the default audio level meter value,

- Available options are -18dB and -20dB.

- Audio level meter within selected value turns to

green and exceeded audio level is displayed in

yellow.

- Audio level exceeding -4dB is displayed in red.

• ALM SIZE (Audio Level Meter Size)

- Used to control the size of the audio level meters.

- Available options are [SMALL] and [LAGRE].

• PEAK DECAY TIME

- Sets the reduction time for max value indication

of audio signals.

- Control range is from MIN 0 to MAX 100. Bigger

number means a longer display time for max

value.

CH 01
CH 02
OFF
PAIR
-18 dB
SMALL

AUDIO

F-7HS

VOLUME
Em. AUD LEFT
Em. AUD RIGHT
LEVEL METER
ALM DISPLAY
ALM REFERENCE
ALM SIZE
PEAK DECAY TIME

+ 15

+ 10

Summary of Contents for F-7HS














































Search results

Summary of Contents for F-7HS

Reviews:

Related manuals for F-7HS

Brands by name

Popular brands

TVLogic F-7HS, Operation Manual

Search results

Summary of Contents for F-7HS

Reviews:

Related manuals for F-7HS

Brands by name

Popular brands