59
Output power
10W rms into 4 ohms with 12.0V supply
Amplifier type
Optimized Class D with on-off-mute pop noise
suppression, short circuit and over temperature
protection
Frequency response
20Hz to 24kHz (-3dB)
THD+N
0.07% @ 1kHz 1W into 4 ohms
0.23% (output at maximum before clipping)
Signal/Noise
better than 71dB @ 1kHz unweighted
Crosstalk:
better than -63dB @ 1kHz to 20kHz (output at
maximum before clipping)
Nominal input level:
353mVrms unbalanced, 1.77Vrms balanced
Input sensitivity:
848mVrms (-1.43dBV) balanced
84mVrms (-19.4dBu) unbalanced
for maximum output (>10Watts into 4 Ohm load)
before clipping.
Input impedance:
27k ohms unbalanced, 24k ohms balanced
NOTE: 0dBu=0.775Vrms & 0dBV=1Vrms
19.6 S2-106AD Audio Input / Output
Inputs:
5 un-balanced RCA, 5 balanced mini-combicon,
1 un-balanced 3.5mm PC input
Outputs:
1 un-balanced RCA, 1 balanced mini-combicon,
1 headphone 3.5mm jack
Maximum input:
+14dBu (Bypass) / +10dBu (delay)
Maximum output:
+13dBu
Gain adjustment:
+13dBu to -14dBu
Nominal level:
0dBu
Bandwidth:
50Hz – 20kHz
> - 0.5dB
At 20 Hz
> - 1.5 dBu balanced
> - 3.0 dBu unbalanced
Cutoff frequency:
-3dB @ 180kHz (in bypass mode)
THD + noise:
<0.015% (+4dBu 1kHz)
0.013% (nominal level 1kHz)
S/N ratio:
75dB (unwe10dBu)
70dB (at maximum output)
Crosstalk:
<-75dB @ 1kHz (0dBu input)
Sampling frequencies:
32kHz, 44.1kHz, 48kHz, 96kHz
Sampling resolution:
24 bit
Digital delays:
0-999ms (@ fs=32kHz)
0-740ms (@ fs=44.1kHz)
0-680ms (@ fs=48kHz)
0-340ms (@ fs=96kHz)
Delay adjustment resolution:
1.0ms
Minimum delay:
0s (in bypass mode)
19.7 S2-108HD Video Input / Output
Connectors:
BNC (eight inputs, two outputs [identical])
Summary of Contents for S2-101A
