TV One S2-101A, Operation Manual

Page: 37 / 68

31
9 S2-101AA
The S2-101AA is an audio power amplifier giving at least 10 Watts per channel into 4
ohm speakers from pre-amplified signal levels.
9.1 Audio inputs and outputs
Visible in the images, the units have:

Left and Right channel RCA (phono) differential inputs

Left and Right differential inputs with mini-combicon connector

Stereo single ended PC input with 3.5mm jack socket

Speaker outputs with spring lock connector
The S2-101AA supports:

10 Watts per channel output power

Front panel and remote control volume setting

On-off-mute pop suppression to protect speakers

Audio amplifier short circuit and over-temperature protection
9.2 Front panel buttons
The following buttons are available on the front of the unit:
Button Button Function
Volume Adjusts the output level in relation to the input.
STANDBY
/ON
Press and hold for 3 seconds to put the unit into Standby (power-
save) mode, with the LED turning red.
Press again to come out of Standby mode (button lamps will
flash once). Whilst in standby, the audio outputs will mute.
9.3 Default settings
When your unit powers up for the first time, the volume level will be set to mid way.
On subsequent power-ups the unit will default to the last volume level selected by
the user.