TV One S2-101A, Operation Manual

Page: 47 / 68

41
be connected to the selected port the signal will not be re-clocked but will be
switched through to the outputs. This will be indicated by Loss of Lock indication.
The unit will display the lock status of the currently selected input on the
corresponding button LED. It will either flash to indicate ‘Loss of Lock Detection” or
remain permanently on to indicate “Signal Lock”. The status is summarized in the
following table:
Indication Signal Lock status
Flashing No Re-clocker Lock
On Re-clocker Locked
11.3 Default settings
When your unit powers up for the first time, source 1 will be routed by default (unless
you are connected to a C2 unit that defaults to a different source). On subsequent
power-ups the unit will default to the last source selected by the user.
11.4 ‘Windows
®
Control Panel’ control
Your unit comes with support for control via RS-232 using the Windows
®
Control
Panel which is available for download from our Internet site, and affords complete
control of the unit.
Please refer to the ‘RS232 control’ section for more information.
11.5 OPTION cable control
The S2 series of switchers have been designed to support networked control in
conjunction with C2-1000 or C2-2000 series units when connected via an OPTION
cable provided with the switcher.
When you connect your unit to a C2 unit via an OPTION cable, the video source
menu on the C2 unit will expand to reflect the extra inputs available on the switcher.
A single OPTION cable connecting the unit to a C2 unit will provide power to the unit
without the need for a separate power supply.
Specifically within the C2 range of products, the S2-108HD provides HD-SDI input
port expansion for the C2-2205 and C2-2255 units.
C2- 2205 and C2- 2255 Rear Panels
Please refer to the ‘OPTION cable control for multiple units’ section for more
information.