background image

14 

7.0 

LIMITED WARRANTY 

tvONE warrants the original purchaser that the equipment it manufactures or sells will be 
free from defects in materials and workmanship for a fixed term from the date of purchase. 
The warranty term for specific product lines is defined below. 

1.

 

tvONE branded products based on tvONE’s CORIO technology are warranted for a 
period of five years from the date of purchase. This includes products with the model 
number prefix of C2, 1T-C2, CX, A2 or S2. 

2.

 

tvONE products, other than those based on tvONE’s CORIO technology mentioned 
above, are warranted for a period of three years from the date of purchase. This 
includes products with the model number prefix of 1T, with the exception of 1T-C2. 

3.

 

LCD Monitors are warranted for a period of three years from the date of purchase, with 
the exception of the LCD panels integrated into the monitors that are supplied by third 
parties. LCD panels are limited to the term and conditions of the warranty offered by 
the respective LCD panel manufacturer.  Such specific LCD panel warranties are 
available upon request to tvONE. 

Should a product, in tvONE’s opinion, prove defective within this warranty period, tvONE, 
at its option, will repair or replace this product without charge.  Any defective parts 
replaced become the property of tvONE.  This warranty does not apply to those products 
which have been damaged due to accident, unauthorized alterations, improper repair, 
modifications, inadequate maintenance and care, or use in any manner for which the 
product was not originally intended. 

If repairs are necessary under this warranty policy, the original purchaser must obtain a 
Return Authorization Number from tvONE and return the product to a location designated 
by tvONE, freight prepaid.  After repairs are complete, the product will be returned, freight 
prepaid. 

LIMITATIONS - All products sold are “as is” and the above Limited Warranty is in lieu of all 
other warranties for this product, expressed or implied, and is strictly limited to the stated 
number of years from the date of purchase. tvONE assumes no liability to distributors, 
resellers or end-users or any third parties for any loss of use, revenue or profit.   

tvONE makes no other representation of warranty as to fitness for the purpose or 
merchantability or otherwise in respect of any of the products sold.  The liability of tvONE 
with respect to any defective products will be limited to the repair or replacement of such 
products.  In no event shall tvONE be responsible or liable for any damage arising from the 
use of such defective products whether such damages be direct, indirect, consequential 
or otherwise, and whether such damages are incurred by the reseller, end-user or any 
third party.

Summary of Contents for MX-5288

















Reviews: