6
3.0 CHECKING PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make certain the
following items are contained in the shipping carton:
•
1x Transmitter or Receiver unit
•
1x Power Adapter (except 1T-CT-467)
•
1x AC Power Cord (1T-CT-467 only)
•
1x Operations Manual
Note:
Please retain the original packing material should the need ever arise to return
the unit. If you find any items are missing, contact your reseller or TV One immediately.
Have the Model and Serial Number and Invoice available for reference when you call.
4.0 CONNECTING THE HARDWARE
Please study the panel drawings below and become familiar with the signal input,
outputs, power requirements/inputs plus any controls present.
Note: Each product has
somewhat different capabilities and therefore different cable connections are present.
Locate the drawing for the item(s) you have purchased and become familiar with the
connectors used in that product. The resolution capability of the remotely located
display devices must be capable of displaying the output of the source device. Before
connecting the CAT.5 extender system, verify that the display device on the receiving
end can support the output resolution and signal format by connecting it directly to the
source device.
4.1
Cat.5/5E/6 Cable Notes
Pins and pairing.
Make sure the CAT5/5E/6 cable pin assignments are standard. The
correct pairing is straight through pin-to-pin, with pairing as follows.
Twist density.
UTP cable pairs have different twist densities (twist pitches). There are
two pairs with high density twist and two pairs with low density. Colors vary by
manufacturer. Twist densities can be seen by stripping off about 10 cm (4’) of insulation
and visually inspecting. Pairs 1-2 and 7-8 should be assigned to high density twists.
Failure to assign correct twist densities can result in image jitter. The ABCD picture
shows typical UTP cable, with pairs A and C showing a high pitch twist (assign (assign
to pin pairs 1-2 & 7- 8), and B and D with low pitch twist (assign to pin pairs 3-6 & 4-5).
Summary of Contents for 1T-CT-400 Series
Page 1: ...Instruction Manual 1T CT 400 Series Cat 5 Extenders...
Page 2: ......
