1T-C2-511 A
ND
1T-C2-520 O
PERATION
M
ANUAL
21
This menu item allows you to select the type of signal output your unit will provide.
Types of output vary depending on the resolution selected and include various types
of component signals YUV with tri level sync. (tlYUV) and RGB signals RGBHV,
RGBS, RGsB (sync on green).
This positions the selected Window horizontally and vertically on the monitor. This
should only be used for ‘fine tuning’ and should not normally require adjustment.
This screen provides a quick and easy way to store all current operating parameters.
The unit will remember the set up you are currently using at the time of data storage
and also when you next apply power. To store the current settings, press and
release the menu button.
This parameter controls whether the ‘welcome’ screen is displayed or not on power
up – it can be disabled as required. This is useful when a unit is installed as part of
an overall system.
This menu item allows the adjustment of the serial baud rate used for RS-232
communications. The rate can be adjusted to 9600, 19200, 28800, 33600, 38800,
57600 and 115200. (This adjustment is provided for those instances where you wish
to use the RS-232 control system for your own purposes.) The default baud rate is
57600.
Power Cycles refers to how many times the unit has been powered since it left the
factory. This is an informational screen. No action is taken regardless of the value
shown here, however some users have an equipment cleaning or specification audit
procedure and this information may be useful to those users.
CORIO2 1T-C2-5xx
OSD on power up [On]
CORIO2 1T-C2-5xx
Push to store
CORIO2 1T-C2-5xx
RS232 baud rate [57600]
CORIO2 1T-C2-5xx
Power cycles 4
CORIO2 1T-C2-5xx
H/V shift
[ 0] [ 0]
CORIO2 1T-C2-511
Output type
[RGBHV]
