1T-C2-511 A
ND
1T-C2-520 O
PERATION
M
ANUAL
20
On the 1T-C2-520 repeatedly pressing the INPUT button cycles through the three
possible inputs, DVI-D, DVI-A and YPbPr. If the selected input has no connection or
the resolution is not one of those supported by the unit, then the error LED will
illuminate and the output resolution will revert to 525i with the OSD permanently on.
7.4
The Menu Structure
Menus are arranged so that a particular general function has a menu name on the
top line and beneath that either a sub-menu or one or more related individual
settings are displayed.
In some cases the functionality is global – meaning it has an effect on the unit as a
whole (such as changing the output format). In the majority of cases, the function is
related to a specific operational area of the unit, detailed by the text in the top line.
There are two screens that appear before the Group Menus (sub-menus) are
accessed.
The first is the ‘welcome’ display shown above indicating the model of the unit.
Moving to the next menu item displays the firmware information screen (the numbers
on your unit will be different to those shown). The SW number refers to the version
of firmware loaded into the unit, this can be upgraded from the support website.
The PT and BT numbers refer to Hardware version information and are of interest to
the Technical Support Group should you ever need assistance.
The source display screen allows the input source for the currently selected window
to be changed. The top line of the display shows the detected characteristics of the
signal. Valid input sources match those available on the front of the unit.
This menu item allows you to select different pairs of audio channels from the SDI
signal and route them to both the AES-3id and the stereo analog outputs. The odd
channels will be routed to the left output, whilst the even channel will be routed to the
right output.
TV One
CORIO2 1T-C2-5xx
www.tvone.com
SW: 154. PT: 70, BT: 65
1280x720 60Hz
Source
[SDI1]
CORIO2 1T-C2-511
Audio L&R extract
[ 1&2]
