TV Logic Viewfinder VFM-056W, Operation Manual

Page: 14 / 32

V
iewfinder Monit
or 14
t
Focus Assist Level
- Used to set the edge difference value between
the edges in an image.
- Available values are from 0 to 100. Larger value
means more sophisticated detail detection.
- Designated color is displayed when the difference
of the edges exceeds the previously set value.
- This feature is available only when the FOCUS
ASSIST mode is activated.
* See section “Other Function [7] Focus Assist”
on page 24 for more information.
t
TimeCode
- Used to set the time code among OFF, VITC and LTC.
t Image Mirror (Hor.)
- Used to reverse the left and right of the image.
- The OSD menu is also reversed.
t
Screen TALLY On/Off
-
Used to set Tally operation according to
the input level of TALLY IN terminal which is
among the terminals of XLR 4P connector in
the rear.
t
Screen TALLY Operating Level
- Used to set the input level of Tally operation.
(Open&Low : less than 0.6V, High : more than
2.5V)
- High: Set the level as “High” to activate the
Tally and set the level as “Low” to inactivate
the Tally.
- Low: Set the level as “Low” to activate the Tally
and set the level as “High” to inactivate the Tally.
t
Screen TALLY Color
- Used to set Tally color.
- Available colors are Red, Green and Yellow.
t
Zoom
- Used to magnify the image up to 90% on a
pixel basis and is displayed on full screen.
* (e.g.,10% Zoom : If the input signal’s resolution
is 1920 x 1080, only 90% (1728(H) x 976(V)) of
the image would be shown on full screen
without 10% (192(H) x 108(V)) of the image.)
* See section “Other Functions [5] Zoom” on
page 20 for more information.
t
Zoom Width Scroll
- Activated when [Zoom] mode is selected.
- Used to move the enlarged image to the left/
right by scrolling the Knob.
t
Zoom Height Scroll
- Activated when [Zoom] mode is selected.
- Used to move the enlarged image to the Up/
Down by scrolling the Knob.
t
DSLR SCALE
- This is a special function for CANON DSLR camera.
- Used to scale the image with different
resolution as to the operation mode(Live View/
Record/ PlayBack) of the camera to fullfill the
screen.
* See section “Other Functions [9] DSLR SCALE”
on page 25 for more information.
t
Focus Assist
- Used to indicate the pixels of good focus with
a designated color.
t
Focus Assist Color
- Used to select a color for FOCUS ASSIST among
red, green and blue.
[4] Display/Video
6. Menu Operations