6
SJ-35
May 2017
MAINTENANCE INSTRUCTIONS
WARNING!
If you are not completely familiar with automotive lift maintenance
procedure, please contact your distributor for instructions before any
practice.
TO AVOID PERSONAL INJURY, permit only qualified personnel to perform maintenance on
this equipment.
Daily:
•
Inspect sliding jack adapters for damage or excessive wear.
•
Inspect hydraulic system for leaks.
•
Inspect for loose bolts, broken/damaged components.
•
Inspect linkages for damage, wear and tear.
Monthly:
•
Inspect the slider body assemblies.
Six Months
•
Check fluid level in hydraulic reservoir.
Fluid Level Checking Procedure:
1. Completely lower rolling jack.
2. Wipe reservoir clean to prevent contamination of fluid.
3. Remove fill plug and check fluid level. Fill as required to bottom of fill hole with AW32
hydraulic fluid. Take care to prevent contamination during filling operation.
4. Reinstall plug hand tight only.
NOTE: Repair/Replace as required with original equipment parts.