Page 4 of 51
1
GENERAL
1.1
Incoming Inspection
Upon receiving your Tuttnauer Autoclave carefully inspect the outside of
the shipping carton for signs of damage. If any damage to the carton is
found note the location with respect to the autoclave and check that area of
the autoclave carefully once it is fully unpacked. Observe packing method
and retain packing materials until the unit has been inspected. Mechanical
inspection involves checking for signs of physical damage such as:
scratched panel surfaces, broken knobs, etc.
If any damage is found contact your dealer as soon as possible so that
they can file a claim with the shipping carrier and also notify
Tuttnauer.
All Tuttnauer products are carefully inspected prior to shipment and all
reasonable precautions are taken in preparing them for shipment to assure
safe arrival at their destination.
Note
: Lifting and carrying should always be done by two people.
1.2
Warranty
To activate your warranty or for warranty information on this unit please
contact your dealer or Heidolph Brinkmann at one of the #'s listed below:
Heidolph Brinkmann, LLC, 1241 Jarvis Avenue, Elk Grove Village, IL
60007, 856-786-1448, Toll Free: 866-650-9604,
Fax: 856-949-1167
Brinkmann Instruments (Canada) Ltd. 4160 Sladeview Crescent #6,
Mississauga, Ontario L5N 2L8, Ph: (905) 569-0664,
Toll Free: (866) 260-6069, Fax: (905) 569-0665
Tuttnauer
USA
Co., Ltd., 25 Power Drive Hauppauge, NY 11788, USA
(800) 624 5836, (631) 737 4850, Fax: (631) 737 0720
e-mail:[email protected].
Note:
If you have any questions or there are any difficulties with this instrument
and the solution is not covered in this manual, please contact your dealer
or Heidolph Brinkmann.
Do not attempt to service this instrument yourself
.
1.3
Ordering Information
Several items must be specified when ordering the unit from your dealer.
•
The chamber diameter and chamber depth required
•
Please specify the supply voltage available (i.e. 115v/208v; 1Ph/3Ph)
•
The temperature scale needed (Celsius or Fahrenheit).
•
The pressure scale needed (kPa or psi)
