MAN205-0097044ENO Rev. A
Apr. 2014
Page 7 of 28 pages
2. PRINTER
2.1 Printer
Output
The autoclave is equipped with a character printer, which prints a detailed history of
each cycle performed. (This can be used for the record or for subsequent consideration.)
The printing is on thermal paper with 24 characters per line and contains the following
information:
Date:
Time:
Ser.
Num:
Model:
Version:
Cycle
Num:
Cycle
Name:
Ster
Temp:
Ster
Time:
Dry
Time:
End
Temperature
When the sterilization cycle begins the printer starts printing the above data.
After the preliminary printing, the autoclave starts performing the sequence of operations
of the cycle. The measured values of temperature and pressure are printed at fixed time
intervals, according to the phase of the process, as shown in the table on the next page.
The data is printed from the bottom up, beginning with the date and ending with "Cycle
Ended". For an aborted cycle, "Cycle Failed" and the Error message are printed (refer to
"Displayed Error Messages/Symbols").
For an example of a typical printout, see next page.
