Tuta S30 User Manual Download Page 45

Page: 45 / 66

TUTA S30 GSM POWER SOCKET USER MANUAL

This feature depends on the temperature sensor.



Method

The

Master

user sends following SMS message in order to:

Enable the temperature rapid changing alarm:

#160#1#

(27)

Set time period and temperature changing value:

#160#

Temp

Time

(28)

•

Temp:

The values lie in the range of 1 to 50 centigrade degree.

•

Time:

The values lie in the range of 1 to 300 minutes.

•

Default Temp is 2 degree and Time is 1 minute.

Disable the temperature rapid changing alarm:

#160#0#

(29)



Successful SMS reply

Fast temperature changing.: function ON/OFF

Delta:**

Time:* minutes

3.8 SMS notification upon the socket output changing



Description

TUTA S30 will default notify the user when the state of the socket

output is changed with a SMS notification. The Master user can

enable/disable this SMS notification.

Summary of Contents for S30



































































Search results

Summary of Contents for S30

Reviews:

Related manuals for S30

Brands by name

Popular brands

Tuta S30, User Manual

Search results

Summary of Contents for S30

Reviews:

Related manuals for S30

Brands by name

Popular brands