background image

INSTRUCTIONS

OLYMPUS PANNIER BAGS

1

Thank you for choosing Tusk High Quality products for your adventure needs. Everyone at Tusk is dedicated

to delivering the highest quality products possible to enhance your adventure riding.

Please carefully read/follow these instructions to ensure the best experience with your new purchase.

PACKING THE TUSK DRY DUFFEL BAG

 

1. Pack bag with desired items. Due to the high amount of weight on motorcycles, we recommend 

packing lighter items.  

2. Roll top of bag downwards until the roll reaches the top of the items. Allow for the air to 

release from the bag. You want a minimum 3 folds (1.5 rolls) to ensure waterproofness.

3. Buckle roll top together.

4. Please note the front zipper pocket is only Water Resistant. The main pocket of the bag is

Waterproof when rolled properly.

 

MOUNTING THE DUFFEL BAG TO A TOP RACK

1. Route each webbing strap into a buckle (4 straps, 2 male and 2 female buckles).

2. Loop straps around/through the top rack and back through themselves on all 4 corners of top rack. 

 

 

 

Thank you for choosing Tusk High Quality products for your adventure needs. Everyone at Tusk is

 dedicated to delivering the highest quality products possible to enhance your adventure riding.

Please carefully read/follow these instructions to ensure the best experience with your new purchase.

MOUNTING AND FILLING TUSK OLYMPUS BAG SYSTEM

1. Secure both Olympus bags to the pannier rack.

2. Ensure that the 3 top straps are tightly secured to the Olympus bags. Buckle the 3 top straps 

of the bags together over the top rack of the motorcycle and ensure they are tight.

3. Place the Tusk Defender Dry Bags inside the Olympus bags. 

4. Pack desired items inside the dry bags and roll top of dry bag down. You want 

a minimum 3 folds (1.5 rolls) to ensure waterpoofness.

  

5. Roll the top of the Olympus bag down until the items inside the bag restricts 

rolling down futher. You want a minimum of 3 folds (1.5 Rolls).

6. Buckle the rolled top into the designated buckles on the sides of the bags and tighten the straps.

 

 

 

Summary of Contents for OLYMPUS METAL PLATE

Page 1: ... the plate is in a good central location to the pannier rack hoop 3 Tighten down the five 5 bolts so the plate is fixed in that location Ensure the plate is still able to be removed and re mounted easily with minimal free play 4 Repeat the process on the other side 5 Remove both metal plates Be mindful of which plate you had on which side and what bag you are mounting to it We recommend installing...

Page 2: ...you may need to move the brackets to different slots 3 Tighten down the four 4 U Bolts and two 2 L Bolts so the plate is fixed in that location Ensure the plate is still able to be removed and re mounted easily with minimal free play 4 Repeat the process on the other side remove both plates and route the 1 5 strap through the plates Be mindful of which plate you had on which side and what bag you ...

Page 3: ...r rack 2 Ensure that the 3 top straps are tightly secured to the Olympus bags Buckle the 3 top straps of the bags together over the top rack of the motorcycle and ensure they are tight 3 Place the Tusk Defender Dry Bags inside the Olympus bags 4 Pack desired items inside the dry bags and roll top of dry bag down You want a minimum 3 folds 1 5 rolls to ensure waterpoofness 5 Roll the top of the Oly...

Page 4: ...ighten the strap 8 Place desired items in side pockets You want a minimum 3 folds 1 5 rolls on the roll down side pocket CAUTION Secure or remove excess strap to prevent straps from getting caught or burnt Warranty is not valid for improper installation Inspect luggage before during riding adventures As contents shift straps may loosen Refer to www rockymountainatvmc com for replacement parts ...

Reviews: