background image

1. Standby Mode

Heater is off.

2. Comfort Mode

Heater is maintaining room temperature set by the user, range 7-32 °C.

3. Night Mode

Heater is maintaining room temperature 3.5 °C lower than comfort temperature.

4.  Frost Protection Mode

Heater Maintains room temperature at 7 °C.

5. Eco-1

Heater is maintaining room temperature 1°C lower than comfort temperature.

6. Eco-2

Heater is maintaining room temperature 2°C lower than comfort temperature.

Comfort Mode Setting 

Push Mode key to enter into Comfort mode, then press the”+”or “-” key

to adjust the temperature. Push on either “+” or “-” key for 5 seconds, the temperature will change
quickly. Note this is the temperature the heater will operate at when the timer mode is on.

Push "+"or "- " key

Push on "-" key for 5 seconds. 

Night Mode 

Temperature setting on Night mode can be adjusted in the same way as Comfort

mode. If it is not set the temperature will be set at 3.5°C below the Comfort setting.

Please note the Night temperature is also the temperature the heater drops to when it is the
timer mode during the ‘off’ period.

Push either "+"or "-" key. Push on "+" key for 5 seconds. 

Frost Protection Mode:

The heater will come on if the room temperature falls to 6.5

°

C and it

will maintain a room temperature of 7

°

C.

 

 

 

8

Summary of Contents for TUS1500


















Reviews: