4
CORRECT POSITIONING OF THE RADIATOR
Unpack the radiator and place it carefully on the ground,
using the polystyrene as protection. Make sure that the
radiator and its power cable have not been damaged
during transportation.
Do not use the radiator if it’s damaged.
During the installation ensure that the radiator is not
plugged in. Ensure that the home voltage corresponds to
the Voltage indicated on the radiator (220V – 240V). For
easy installation, your radiator is equipped with an
installation kit containing 4 brackets, 8 screws, 8 plastic
screw anchors.
1. Drill the 8 holes (fig.1) with a diameter of 6 mm and
minimum depth of 5 cm. Insert the plastic screw
anchors into the holes.
2. Fix the upper and lower brackets at the wall, using the
given screws. In this phase do not tighten up
completely the lower brackets.
INSTALLATION
Safety precaution: before and during the installation, make sure that the radiator is not
connected to the electricity supply. The radiator must be installed vertically.
The radiator must be fitted at least 100mm from the floor.
The radiator can not be installed above a power point and must be positioned at least at 15 cm
from any side obstacle (shelves, furniture, etc…).
The radiator must be positioned at least at a frontal distance of 50 cm from any objects or
furniture.
95
1540
100
min
fig.1
