• the
PLAN and
MODE/
PLAN contacts
change the values of the selected display.
In these figures the contacts which are connected are
shadowed.
Thus, to correct the time, do as follows:
1. Activate the Time Setting mode by connecting the
MODE and
MODE/
PLAN contacts con-
tinuously to scroll through the menu. Release
your fingers immediately when Set appears on the
display. The Time Setting display will now be
shown (Fig. 4.12).
2. The hour display starts to blink immediately
(Fig. 4.12). If you want to change it, keep the
PLAN and
MODE/
PLAN contacts con-
nected. The hours will start to scroll (Fig. 4.13).
Release your fingers immediately when the cor-
rect value is displayed. [To change the A or P for
a.m. or p.m. scroll the hours past 12:00].
3. To scroll through the minute, month and date,
keep the
MODE and
MODE/
PLAN con-
tacts connected. Release your fingers when the
display you wish to change is blinking (Fig. 4.14).
Repeat step 2 to change this value (Fig. 4.15).
4. Repeat steps 2 and 3 to change any additional
values.
5. Exit the Time Setting mode with the RETURN
command, i.e. by connecting all three contacts
at the same time. First make contact between the
PLAN and
MODE contacts and after that
with the
MODE/
PLAN contact.
33
Figure 4.10
Personal / Altitude
Adjustment Setting, Step 4
The desired mode A2 is con-
firmed by connecting the
MODE and
MODE/
PLAN contacts.
A 2
A
m
S
C
S
P
E
E
D
HIS
LOG
ALT
SET
PLAN
MODE
PLAN
MODE
PLAN
Figure 4.11
Personal / Altitude
Adjustment Setting, Step 5
Return to the surface mode.
Check that the selected
mode A2 is displayed..
SURF
MAX
DIVE TIME
A 2
¡C
A
m
S
C
S
P
E
E
D
HIS
LOG
ALT
SET
PLAN
MODE
PLAN
MODE
PLAN
Figure 4.12 Time Setting
Ready to adjust the hour
reading (blinking).
SURF
MAX
DIVE TIME
A 2
¡C
A
m
S
C
S
P
E
E
D
HIS
LOG
ALT
SET
PLAN
MODE
PLAN
MODE
PLAN
NOTE
In case of the minutes and date, the change is
made separately for both digits, as shown by the
blinking digit. In case of the hours and month,
the complete number is changed simultaneously.
!
!
