background image

automatically return to the READY display.

Higher personal/ altitude adjustment modes will
shorten the no-decompression time limits. These
limits at different personal/ altitude adjustment
mode selections are shown in Tables 6.1 and 6.2 in
Section 6.1, “OPERATING PRINCIPLES”.

Dive Numbering Shown 
During Dive Planning 

Several repetitive dives are considered to belong to
the same repetitive dive series when the 

IQ-400

has

not deactivated itself. The first dive of the series will
be numbered as DIVE 1, the second as DIVE 2, the
third as DIVE 3 etc. (Fig. 3.6).

When the surface time has been less than 10 minutes,
the dives are considered to be the same. The dive
number will not change for the second part of such a
dive and the dive time will start where it left off.

3.2.3 Calendar Clock Function

The calendar clock is always shown on the display,
when the 

IQ-400

is deactivated.

Once the 

IQ-400

is activated the TIME display can

be retrieved any time on the surface mode by touch-
ing the MODE and MODE/PLAN contacts for about
two seconds. The current time and date will be
shown for four seconds (Fig. 3.7).

When diving, the dive entry time and date is regis-
tered in the logbook memory. Remember always to
check before diving that the clock is set, especially
when traveling to different time zones. For adjusting
the clock, refer to Section 4.4, “Setting Time and
Date”.

In the metric version of the 

IQ-400

, the 24-hour time system is used, while in

the imperial version the 12-hour time system is used.

3.3 Diving

3.3.1 Basic Dive Data

The 

IQ-400

will remain in the SURFACE mode at depths less than 1.8 m [6

feet]. At depths greater than 1.8 m the 

IQ-400

will go into the DIVE mode.

16

Figure 3.5 

Dive Planning

The no-decompression

time limit at 30.0m

(100ft) is 14 minutes 

in A1 mode.

NO DECO

DIVE TIME

DIVE

A 1

A

m

S

C
S

P

E

E

D

HIS

LOG

ALT

SET

PLAN

Figure 3.6

Dive Planning

The no-decompression

time limit at 30.0m

(100ft) is decreased to 

5 minutes in A1 mode

after the third dive of the

series.

NO DECO

DIVE TIME

DIVE

A 1

A

m

S

C
S

P

E

E

D

HIS

LOG

ALT

SET

PLAN

Summary of Contents for IMPREX II IQ-400
















































Reviews: