![Turnigy T-VBar600 Manual Download Page 18](http://html1.mh-extra.com/html/turnigy/t-vbar600/t-vbar600_manual_1182122018.webp)
12: FBL UPLOAD PARAM
Save All Parameters in Current mode from the V-Bar 600 unit to the LCD Programmer Box
Press any of the following keys „+10, -10, +1, -1‟ on the LCD programmer to upload and save all parameters in the unit to the
LCD programmer‟s memory, for that particular flight mode. The group of parameters for each flight mode are saved
independently and must be uploaded for each flight mode used. By uploading and saving to the LCD programmer, the
parameters can be easily transferred to another Turnigy® V-Bar 600 unit. After the upload has completed, the LCD
programmer will display “Upload Success”.
13: DOWNLOAD PARAM
Download parameters from the LCD Programmer Box to the V-Bar 600 unit in the current flight mode
Press any of the following keys „+10, -10, +1, -1‟, on the LCD programmer to download the parameters from the LCD
programmer‟s memory to the Turnigy® V-Bar 600 unit in the current flight mode. Repeat this step for all flight modes.
Downloading is a means of transferring previously saved parameters ( via upload) from a LCD programmer to a new Turnigy®
V-Bar 600 unit. After the download had completed, the LCD programmer will quickly display “Download Success”.
14: VERSION
Firmware version 3.01
Be sure to check your settings
Tip: Please take care of your Turnigy® V-bar 600
!
Do not open the bottom cover of the Turnigy® V-Bar 600 housing. This will avoid damaging the product.